Frequency Converters
For over 30 years Piller has been supplying ground power systems for both military and civil applications.
Through continual research and development of our products we guarantee a high level of flexibility in meeting clients’ demands, however complex. Piller specialists ensure operating personnel of all Piller products are fully trained.
50Hz / 60Hz Frequency Converters
Piller has supplied 50/60Hz ground power systems for both military and civil applications. Through continual research and development a high level of flexibility is guaranteed in meeting clients’ requirements. Products include Piller Motor Generator Sets with full digital control and the Piller UNIBLOCK UBSF.
Static 30kVA to 500kVA
50/60hz Solid State Frequency Converter
- From 30kVA up to 500kVA
- Paralleling capability without additional synchronisation or load sharing devises
- Small foot print and compact design
- High efficiency
- High reliability
- Microprocessor control and regulation
Many industrial applications as well as shore to ship and naval power systems require a power supply with a frequency of 60Hz even in countries using 50Hz in general. The Piller Solid State Frequency Converters are available for the efficient conversion of any input frequency or voltage to the power supply needed for the consumer.
Rotary 125kVA to 2300kVA
Motor Generator Set 50/60Hz from 125kVA up to 2300kVA
The main purpose of the Motor Generator is to convert the 50Hz power from the mains to 60Hz power used for load supply. The experience that Piller has gained in the construction of several thousand power supply systems was utilised during development. The MG-Set consists of a converter and a switchboard.
Two different versions are available.
Version one is the so called “free standing version”. In this case the converter and the switchboard are separated.
Version two is the “compact version”. In this instance the converter and the switchboard are built into a compact cabinet.
The Motor Generator Sets are available in 50/60Hz, 60/50Hz and from 125kVA up to 2300kVA
Features:
- Monobloc converter
- High overload capability
- Load dependent parallel operation
- Special earth leakage protection
- Stable operating performance due to microprocessor control
- Low output distortion factor
- No mains disturbance
- Interface for remote control and centralised control / indication, PC or modem connection
- Up to 12% automatic line drop compensation
400Hz Frequency Converters
In the field of 400Hz frequency converters, Piller’s ground power equipment such as APOJET AJS, APOJET AJR and APOJET AJT can be found in operation at major airports and military air bases throughout the world. Piller provides tailor-made solutions for each project. Through continuous research and development a high level of flexibility is guaranteed in meeting clients’ requirements. All Piller ground power equipment is designed and built to the highest quality.
Static Frequency Converter 5kVA to 200kVA
5kVA to 200kVA Solid State Frequency Converter
APOJET AJS
The Solid State APOJET AJS static frequency converters designed to generate 400Hz power in workshops for aircraft equipment service or in hangars. Using the latest state-of-the-art technology and newest trends in the power electronics field and digital control, the system offers the best solution for aircraft ground power supply systems without any harmful harmonic distortion back into the mains.
Features
- Regulated rectifier with IGBT´s (THD at input current < 5%)
- Fully-controlled inverter with IGBT´s
- Pulse-width modulation
- Special earth leakage protection
- Stable operating performance due to microprocessor control
- Low output distortion factor
- Constant output voltage even with non-linear loads
- High degree of user-friendliness
- Interface for remote control and centralised control/indication, PC or modem connection
- Up to 12% automatic line drop compensation
Rotary Frequency Converter 20kVA to 150kVA
20 to 150kVA Rotary Frequency Converter
APOJET AJR
The Rotary APOJET AJR rotary frequency converter is designed to generate 400 Hz power for aircraft as a decentralised ground power system mounted on the apron or near by the rotunda. Using the latest state-of-the-art technology for the system control and several decades of experience in manufacturing of rotary converters, the APOJET AJR offers the best reliability for aircraft ground power supply systems with high overload capability and with absolutely no mains disturbance.
Features
- Monobloc converter (two bearings only)
- High overload capability
- Noise reducing compact design (one cabinet containing converter and switchgear)
- Special earth leakage protection
- Stable operating performance due to microprocessor control
- Low output distortion factor
- No mains disturbance
- High degree of user-friendliness due to intelligible control panel interface for remote control and centralised control / indication, PC or modem connection
- Up to 12% automatic line drop compensation
Gatebox AJT 90-180kVA
The APOJET AJT step down transformer (Gatebox) is designed to step down the high 400Hz transmission voltage supplied by a centralised Ground Power System.
Gatebox AJT 90-180kVA
The system can be installed either on the apron or beside a boarding bridge. It is also available as a two-cabinet version. Using the latest state-of-the-art technology and newest trends in the power electronics field and digital control, the APOJET AJT offers the best solution for aircraft ground power supply systems.
Features
- Electronically regulated output voltage
- Microprocessor controlled
- Automatic voltage drop compensation
- High degree of user-friendliness
- Interface for remote control and centralised control / indication
- Special earth leakage protection
APOCOIL Cable Storage System
The APOCOIL cable reeler system stores 400Hz power cables at boarding ridges and aprons by using a motor driven coiling drum. The system is mounted either under the front end of the boarding bridge, on top of a frequency converter or on a support stand on the apron. The APOCOIL is operated by push buttons at the aircraft plug and/or via a remote control panel. Optionally it is equipped with 400Hz power cable and aircraft plug in accordance with customer specification.
APOCOIL Cable Storage System
Features
- Aluminium housing with integrated termination box
- Aluminium coiling drum with spiral channel for single jacket cable
- Limit switches
- Cable guide at inlet
- Gear motor with brake
- Power transmission by wear & tearless slip rings
- Internal control device
- Soft start /stop device
APOJET 28V DC GPU
The 28V DC solid state ground power unit is designed to generate 28VDC power for aircraft equipment. The system is available either as stationary or mobile version. Using the latest state-of-the-art technology and newest trends in the power electronics field and digital control, the system offers the best solution for aircraft ground power supply systems.
APOJET 28V DC GPU
The APOJET 28VDC solid state ground power unit with rating of 400A and 600A are designed to generate 28VDC power for helicopters and smaller aircrafts. The system is available either as stationary or mobile version. Using the latest state-of-the-art technology and newest trends in the power electronics field and digital control, the system offers the best solution for aircraft ground power supply systems.
Features
- Compact dimensions and a robust design
- Output voltage regulation and current limiting
- Peak current up to 2000A
- Galvanic isolation between in and output
- Output filter
- Interface for remote control and centralised monitoring via LAN or fieldbus
- Up to 12% automatic line drop compensation
- Optional mains and output cable to customers’ specifications
- Optional 28VDC aircraft plug
Naval
For over 50 years, Piller has been protecting military and civil applications, providing power systems to airports as well as shore-to-ship and on-board power systems for both submarine and surface vessels.
The safety and smooth operation of these installations and vessels depends on the supply of reliable quality power. Exacting standards of manufacture are vital to ensure life safety and continuous operations even in the most extreme of conditions.
Naval Power Systems
Piller has been a supplier partner in the field of naval technology since 1965. Originally providing only shore connection stations for supplying power to naval vessels, new developments followed, including special fan systems for submarines, rotary and static frequency converters, on-board UPS systems, special purpose DC motors, brushless charging and ship’s generators and alternators.
Features
- DC / Charging Generators
- Air and water-cooled AC Generators
- Static and rotary frequency converters
- Static UPS
- Power supply / battery charger systems
- Special DC Motors
- Starter for DC Motors
- Special Fans
- Shore to Ship supply systems
- Technical documentation / Training World wide after sales service
Shore-to-Ship Systems
Piller offers shore-to-ship solutions including voltage transformers and frequency converters up to 1500kVA to match the grid power, voltage and frequency to the ship’s onboard power systems. Solutions for 50/60 Hz supply are available with static and rotary technology in low voltage and medium voltage.
Shore to Ship Power Converter
The Piller Shore Power converter meets the requirements for marine application and is foreseen to supply a ship. Piller offers shore-to-ship solutions including frequency converters up to 1500kVA to match the grid power, voltage and frequency to the ship’s onboard power systems.
Solutions for 50/60 Hz or 60/50Hz supply are available with static and rotary technology in low voltage and medium voltage.
Features
- Stable Clean output power even with high marina voltage transients input
- 100% current balance in input phases regardless of output load unbalance
- High overload capability (to handle high inrush currents)
- Parallel operation up to 8 systems
- Maximum reliability (MTBF 1.000.000 hours)
PILLER NAVAL TECHNOLOGY - Mission critical power solutions
Latest news
Downloads
-
UB-V Series Industrial Sector Flyer 50Hz
-
UB-V Series Industrial Sector Flyer 60Hz
-
UB-V Series Industrial & Healthcare Brochure
-
Naval Technology Brochure
Piller Group, Osterode – Converter Production
Related products
UB-V Series for Data Centres
Introducing Piller’s new high-performance UB-V ELECTRICALLY COUPLED UPS series for the conditioned power protection needs of cloud hyperscale, wholesale colocation and large enterprise deployments.
UB-V Series for Industrial & Other Sectors
Meeting today’s industrial and commercial power protection challenges. Technological advances in virtually every field of human endeavour are bringing unprecedented demands for clean, uninterrupted power and with it, the need for ever more dependable, powerful and flexible UPS solutions.
UNIBLOCK™ – UPS up to 50MW
Meeting today’s industrial and commercial power protection challenges. Technological advances in virtually every field of human endeavour are bringing unprecedented demands for clean, uninterrupted power and with it, the need for ever more dependable, powerful and flexible UPS solutions.
Contact us
Please fill out the enquiry form, and our dedicated team will promptly attend to your request